| REALITY 3D SPECIFICATION | ||
| System | 15 liter, 2 way reflex. | |
| Frequency
response |
38 - 30.000Hz,
Flat response, typical -+2dB or better. The response in the bass area depends of the room and the placement. |
|
| Reflex tuning | 34Hz | |
| Sensitivity | Units = 88dB (2.83V/1m). | |
| Impedance
|
Nominal and Mimimum 6 ohm.
The impedance is linear in bass area (very few speakers are that). |
|
| Recommended
power amplifier |
50 - 100W (6 ohm) without clipping. | |
| Crossover | Advanced In-phase crossover with 1.5kHz crossover point.
Very high musical value components. |
|
| Mid/Bass |
178mm ultra dynamic, linear and high-performance low distortion driver. SD-1 (Symmetric Drive) system voice coil, carbonic cone, double magnet, magnetically shielded. |
|
| Tweeter |
25mm textile dome, ultra dynamic, very linear, high resolution and low distortion driver. SD-2 (Symmetric Drive), LCD (Low Compression Design) and NRC (Non-Resonant Chamber) systems. No use of ferrofluid oil. Special developed CDD (Constant Directivity Design) front plate of soft rubber. |
|
| Connection | Bi-wiring / bi-amping gold-plated terminals. | |
| Finish |
Combination of very thin acoustic polyester textile cover. Top and bottom of different colors / materials. |
|
| Weight | 15kg. | |
| Cabinet size | 380mm x 380mm x 380mm x 1440mm = 15" x 15" x 15" x 57" |
Subject to change without notice.