| REALITY 3D w/ SUB SPECIFICATION | ||
| System | 32 liter,
true 3 way reflex. |
|
| Frequency response |
Passive: 28 - 30.000Hz, Active with ICEpower: 20 - 30.000Hz, Flat response, typical -+2dB or better. The response in the bass area depends of the room and the placement. The frequency area below 250Hz depends on bass-level in-room adjustment. It is possible to position the loudspeakers, to do a nearly flat frequency response down to 20Hz. |
|
| Reflex tuning | 28Hz | |
| Sensitivity | 88dB (2.83V/1m). | |
| Impedance |
Nominal 6 ohm. Minimum 5 ohm. Very linear impedance and phase curve without shifts. | |
| Recommended power amplifier |
50 - 200W (6 ohm) without clipping. | |
| Crossover | In-phase, very high musical value components. |
|
| Mid/Bass | 2 x 178mm ultra dynamic high-performance low distortion drivers. SD-1 (Symmetric Drive) system voice coil, carbonic cone, double magnet, magnetically shielded. | |
| Tweeter | 25mm textile dome, ultra dynamic, very linear, high resolution and low distortion driver. SD-2 (Symmetric Drive), LCD (Low Compression Design) and NRC (Non-Resonant Chamber) systems. No use of ferrofluid oil. Special developed CDD (Constant Directivity Design) front plate of soft rubber. | |
| Connection |
Bi-wiring /
Bi-amping gold-plated terminals. |
|
| Finish | Combination of very thin acoustic polyester textile cover. Top and bottom of different colors / materials. | |
| Weight | 31kg. | |
| Cabinet size | 480mm x 480mm x 480mm x 1800mm = 19" x 19" x 19" x 72" |
Subject
to change without notice.